background image

8

EN

Maintenance

Warranty

Waste disposal

1.  For cleaning, always unplug the heater and leave it to cool.
2.  Wipe the heater regularly with a damp cloth and dry the surface before turning on 

the heater again.

3.  The heater must be cleaned at least once a month during the heating season.
 

CAUTION! The heater should never be immersed in water.

  Avoid using detergents to clean the heater.
  Never let any water get inside the heater; this can be hazardous.

4. 
5.  The heater can be stored in a dry and clean place.
6. If the heater stops working, do not attempt to repair it yourself because it can 

The warranty is valid for 2 years. The heater will be repaired or replaced during 
this time should any malfunction occur. The warranty applies if the heater is used 
according to these instructions and the customer can present a purchase receipt. If 
the heater malfunctions in any way, please contact the store where it was purchased 
or the importer.

The symbol         indicates that this product is not to be disposed of together with 
household waste. This product must be delivered to a recycling service or container 
for electrical appliances and electronic equipment. This is done to avoid health risks 
and prevent harm to the environment. Local businesses (or the environmental station 
in your neighborhood) are required by law to accept and recycle such products, as a 
means of environmentally sound disposal.

Designed and developed by Mill International AS in Norway.

上海谧乐电器贸易有限公司

Shanghai Mill Electric Equipment Trading Co., Ltd
Room 510, Floor 5, Building 2, No.101, Zhong San Jia Li, 
Chuan Chang Road, Xuhui District, Shanghai

Service phone no: 18028174505
www.willheat.cn

Summary of Contents for Convection Series











Reviews: