Antenna Installation
WARNING:
It is installer’s responsibility to ensure that when using the authorized
antennas in the United States (or where FCC rules apply), only those antennas
certified with the product are used. The use of any antenna other than those
certified with the product is expressly forbidden in accordance to FCC rules
CFR47 part 15.204. The installer should configure the output power level of
antennas, according to country regulations and per antenna type. Professional
installation is required of equipment with connectors to ensure compliance with
health and safety issues.
Antenna Compliance
The WMR-400 radio module has been tested and certified with the following
antennas:
5.725-5.825 GHz
Type Model
Gain
(dBi)
Power
EIRP
Operation
Mode
Dish HyperGain
HG5833D
32.5
26
58.5
PTP
Grid Hwayaotek
GA-5775-27
27 26
53
PTP
Panel ARC-5A5823B01
23
26
49
PTP
Omni
Pac Wireless OD58M-12
12
24
36
PTMP
4.9GHz
Type Model
Gain
(dBi)
Power
EIRP
Operation
Mode
Panel ARC-5A5823B01
23
26
49
PTP
2.4GHz
Type Model
Gain
(dBi)
Power
EIRP
Operation
Mode
Grid HyperGain
HG2424G
24 20
44
PTP
Panel ARC-IA2419B02
19
21
40
PTP
Omni Hwayaotek
OA-2450-12
12 24
32
PTMP
Any antenna of same make and lower gain than those listed above may be used
in compliance with certification.
The maximum EIRP limits are listed above with given antennas. In order to use
above antennas, transmitter power settings may need to be adjusted in software
to meet given EIRP limits.
