INSTRUCTION MANUAL KITCHEN SCALE KW-2 GB
Important
1.
Please read the instructions carefully before using the scale.
2.
Ensure that there is nothing on the weighing plate when the scale is
not being used.
3.
Don’t allow water (or any other liquid) to come into the scale.
4.
When using the scale always place it on a solid, smooth and
horizontal surface.
5.
For best accuracy, place the scale at a safe distance of at least 1.5
meters from the operating microwave oven or it must be switched
off. .
Controls
1.
ON --- Press this button to switch on when the scale is turned off.
2.
OFF --- Press this button for 3 seconds to switch off when “0” is
visible in display.
3.
TARE --- Press this button to set back the display to “0”.
4.
MODE---Press this button to change the units displayed from grams
(g) to ounces (oz) or ounces (oz) to grams (g).
Battery
1.
The scales work on 2 Lithium cell battery (CR2032).
2.
Before using, remove the battery compartment cover on the underside
of the scale, place one new battery with positive (+) and negative (-)
terminals properly aligned with the corresponding terminals in the
battery compartment.
3.
Replace battery as soon as “Lo” is displayed and ensure that it is
disposed of at an officially assigned place, for it may pollute the
environment.
Weighing
1.
Press button “ON” to switch on and “0g” or “0.00 oz” is displayed.
2.
Place the ingredient(s) to be weighed directly on the weighing plate,
you can read the weight right away.
3.
Graduation:
：
d=2g , d=0.10oz
；
4.
Overloading display: “EEEE” becomes visible in the display if the
weighing plate has been overburdened.
Adding ingredients
1.
In the weighing scope, you can add ingredients to know the quantity
irrespective of the ingredients that are already in the bowl on the
weighing plate. Also the weight of every ingredient will be displayed.
Please do it as the followings:
2.
Switch on--
Æ
Display “0”--
Æ
Place the ingredient(s) to be
weighed-
Æ
Display the weight-
Æ
Press the button “TARE”-
Æ
Set
back to “0”-
Æ
Place the adding ingredient(s)-
Æ
Display the weight
of the adding ingredient(s)-
Æ
Press the button “TARE”-
Æ
set back to
“0” again-
Æ
…
Switching off
1.
Press button “OFF” for three seconds to switch off when “0” is in the
display.
2.
Automatically power off when the scales have not been used for 60
seconds
Cleaning
1.
Clean the scale with a soft slightly damp cloth and if necessary, some
detergent. Never use hot water or other harsh chemicals to clean the
scale.
