Wilfa HU-430CW, Instruction Manual

Page: 18 / 234

16
EN
INSTRUCTION MANUAL · HUMIDIFIER
Control panel does
not work. Hands are too wet when
operating control panel.
Keep hands dry while
operating the control panel.
Humidifier has
malfunctioned.
Contact Customer Support.
White dust
appears around
the humidifier.
Water being used has a
high mineral content. Use distilled water with the
humidifier. If distilled water is
not available, use purified or
filtered water.
Humidifier was not
properly cleaned after
last use.
Clean humidifier.
Mist is coming out
from the base.
Water tank is not
positioned correctly. Turn off and unplug the
humidifier, then align the water
tank cover with its respective
opening in the inner chamber.
Mist fog coming
out from around
nozzle.
There are apertures
between the nozzle and
water tank. Reposition the cover and
check if the nozzle is well
plugged in the cover.
The warm mist
function does not
produce warm
mist. The humidifier is in
warm-up phase. Wait a few minutes till the end
of the phase.
The mist is too fine to
feel the warmth.
Increase the speed level.
The room temperature
is too cold, and the
mist may cool down too
quickly. Increase the speed level and
heat the room up.
Display show error
code EF. Too much water in water
basin. Remove water tank and empty
water from the base.
Check and clean particles in
water outlet of water tank that
led to leakage. If no leaks,
replace into base.
The following is not considered faulty operation:
• If your water is very hard (containing abnormally high levels of minerals) the
humidifier may produce white dust. This is not a malfunction. The solution
would be to clean the filter more often or use softer water.
• If you stand very close to the humidifier, you will hear the gurgling sound of