18
Fig. 2.02: Lubricating with a disposable syringe
Before lightening the dry spirit tablets check whether the burner slide
moves easily in and out of the burner slide box (in the boiler house of the
steam engine model). If not you can slightly widen the sides of the burner
slide box.
2.2 Assembly instructions step by step
All the parts that you require to build this steam engine, including the tools,
are contained in the Steam Box D 100E. The instruction leaflet is divided
into assembling steps, and each step is illustrated.
Please follow the instructions exactly and step by step, so that the operation
of the steam engine is successful.
Step 1: Assembly of the boiler
Insert the fixing bracket of the boiler through the boiler house (2) from
beneath until the angled sides fit against the upper flanges of the boiler
house (2). Locate in the centre notches to restrict sideways movement, now
the bracket will stay in place due to its own tension. Push the boiler (3)
according to the Fig. 2.2.1 (The water level glass has to stay on the side of
the fire place) between the fixing bracket (4) and the boiler house. Now
push the boiler up against the bracket, and at the same time slide it forwards
until it locks on the rear boiler support.
Fig. 2.2.1: mounting the boiler
Summary of Contents for D100E
