59
Fig.3.40: Assembly of
the bread board with a
second white Led
parallel to the first
white LED. Both
LEDs have the
connection wire (+)
on the right side
Fig.3.41: circuit diagram with two LEDs, here the electrolytic can also be
used alternatively
3.7.2 Light from four LEDs generated through the steam engine
All LEDs (except the flashing one) are in use and one can observe how
powerful the small steam engine of the Steam Box D 100E is.
Plug in the series resistors and the red LED in the upper part of the bread
board, like shown in the left picture. The current is lead through the switch
and the jumpers to the LEDs and to the electrolytic in the lower part of the
bread board. The right figure shows the diagram of the circuit on the bread
board, taken from the other side. Once the circuit is connected to the
running generator the red and orange LED are shining. Also both white
LEDs are shining when you press on the switch.
w
h
it
e
w
h
it
e
Summary of Contents for D100E
