![background image](http://html.mh-extra.com/html/wile/55/55_operating-instructions-manual_981212008.webp)
EN
8
incorrect. You can adjust the result shown
by the meter to conform to a reference
value.
Adjusting the value upwards
When the measurement result is
displayed press twice the
F
- button. Three
bars will appear on the upper edge of the
display. Wait for a moment and the result
appears on the display again.
Now each
time you press the
F
- button, 0,1 moisture
% will be added to the result.
Adjusting the value downwards
When the measurement result is
displayed, press the
F-
button three times.
Three bars will appear on the lower edge
of the display. Wait for a moment and the
result appears on the display again. Now
each time you press the
F-
button, 0,1
moisture % will be reduced from the
result.
Note! This adjustment is specific to the
used scale. In other words there can be
defined own adjustment for each scale.
3.3. Display the scale adjustment
If the selected scale has been adjusted,
you will see the adjustment displayed after
run- text. Each scale can be adjusted for
+/- 4 moisture percent. The value
displayed may be for example
“-.5”
. This
value means that the scale was adjusted
downwards for 0,5 moisture percent.
Summary of Contents for 55
Page 31: ......