7
INSTALLATION TYPE C
These diagrams detail the installaon of the appliance into a Pre Cast Flue where a
950L PRECAST MANTEL
is being fiPed
For details on
950L PRECAST MANTEL
crical dimensions see page 9.
The
950L PRECAST SPACER KIT
is used to
create an interface between the precast flue
and the
950L FIXING PLATE
. Fit the hearth
and firmly aPach the PRECAST SPACER to the
wall. See further details on page 12.
Using mortar or fondue around the inside
edge of the SPACER/FLUE should be sealed
and fixed into place as if it were a marble
back panel. It is important that no leakage
should occur.
For minimum hearth requirements see page
9.
The
950L FIXING PLATE
is then screwed to
the
950L PRECAST SPACER
with the screws
provided. Using fire cement or similar
around the inside edge of the joint between
the
950L FIXING PLATE
and the
950L
PRECAST SPACER
. Furthermore a suitable
high temperature masc should be used to
further seal around the outside edge of the
950L FIXING PLATE
and the wall. See further
details on page 13
Ensure the hearth is set level before con2nuing with the
installa2on. Failure to install a level hearth could affect the
installa2on of the mantel and appliance.
It is extremely important that both the
950L PRECAST SPACER
and the
950L FIXING PLATE
are sealed to the flue as
essenally a complete fireplace opening. Check the integrity of the spacer and fixing plate installaon before pro-
ceeding.
The TYPE C INSTALLATION is completed by
installing the
950L PRECAST MANTEL
to the
wall securely. The mantel should be centred
around the
950L FIXING PLATE
.
The crical dimensions of the
950L PRECAST
MANTEL
are detailed on page 9. These crical
dimensions ensure that the front trim plate of
the fire and the front face of the mantel are
aligned.
The front trim plate of the appliance is fully
adjustable with four independent magnets.
These magnets can be screwed in or out to
posion the front trim plate correctly. This
adjustment is provided as there may be some
variaon in the wall flatness and level.
See page 17 for full details regarding front
trim installaon and adjustment.
