5
INSTALLATION TYPE A
These diagrams detail the installaon of the appliance into a standard 16” x 22” opening.
This method of installa2on is suitable for both Class 1 and Class 2 installa2ons.
This installaon requires a
950L STANDARD MANTEL.
For crical dimensions see page 8.
The
950L FIXING PLATE
supplied is
firmly aPached to the builders opening
aer the hearth has been installed.
Screws and rawl plugs are provided for
this purpose. For minimum hearth
requirements see page 8.
Using mortar or fondue around the
inside edge of the plate/builders
opening this
950L FIXING PLATE
should
be sealed and fixed into place as if it
were a marble back panel. It is
important that no leakage should
occur. See further details on page 14.
Furthermore
a
suitable
high
temperature masc should be used to
further seal around the outside edge of
the
950L FIXING PLATE
and the wall.
The
TYPE
A
INSTALLATION
is
completed by installing the
950L
STANDARD MANTEL
to the wall
securely. The mantel should be
centred around the FIXING PLATE.
The crical dimensions of the
950L
STANDARD MANTEL
are detailed on
page 8. These crical dimensions
ensure that the front trim plate of the
fire and the front face of the mantel
are aligned.
The front trim plate of the appliance
is
fully
adjustable
with
four
independent
magnets.
These
magnets can be screwed in or out to
posion the front trim plate correctly.
This adjustment is provided as there
may be some variaon in the wall
flatness and level.
See page 17 for full details regarding
Ensure the hearth is set level before con2nuing with
the installa2on. Failure to install a level hearth could
affect the installa2on of the mantel and appliance.
