34
SERVICING
INSTRUCTIONS
5.1 Removal of the burner tray.
Remove the two screws holding the lower glass retainer bar as shown in the first diagram.
The removal and replacement of all the gas carrying components will require the removal of the
burner tray. The following informaon details the removal of this tray. Once removed, refer to the
relevant secon that follows detailing the removal of the specific component (s).
Ensure the appliance is off and cold.
Ensure that the gas supply is isolated by the restrictor valve on the appliance.
Remove the fuel effect components - put in a suitable locaon where they cannot be
damaged.
Remove the 4 (four) screws securing the burner tray to the firebox. (See below)
Carefully li the burner tray through the front of the stove.
Re-assemble the tray in the reverse order.
The following diagrams demonstrate the removal of the tray.
