63
12
SECTION 2 - OPTIMUM OVAL SEMI IN GROUND AND IN GROUND POOL
SKIMMER INSTALLATION (Cont.)
STEP
12.3
Install skimmer from outside of pool through to
gasket on gray plate. Secure and tighten with 2 pan
head screws through gaskets and gray plate into
center hole in skimmer.
Tighten 4 corner bolts, do not over tighten.
Note: Skimmer Face Plate (in skimmer assembly)
will be attached after pool liner is installed, locking
the skimmer firmly in place .
13.1
Place white return plate over opening on inside wall
and insert return fitting through return plate and
wall.
Insert second white return plate over return fitting
on outside of wall, then install back nut to
secure inlet fitting. Do not over tighten.
12.3
13.1
13
RETURN FITTING INSTALLATION
STEP
Return fitting
White return
plate
Summary of Contents for Optimum OVAL
Page 1: ...1 OVAL INSTRUCTIONS 95 0771 by Wilbar...
Page 68: ...68 by Wilbar...
