wiking Mini 2, Installation And User Instructions Manual

Page: 11 / 24

11
IMPORTANT
Combustible materials may not be placed under the stove.
WIKING Mini with a base and WIKING Mini with short legs must not be mounted on
combustible floors. It is still considered a combustible floor even if an ember catching,
non-combustible floor plate is placed on top of the combustible floor.
A non-combustible structure under WIKING Mini with a base and low legs must extend
at least 400 mm in front of the stove.
For UK
The variant with small legs and the variant with a base must be installed on a BS non combus-
tible/constructional hearth. The non combustible/constructional hearth must extend 300 mm in
front of the appliance .
Floor in front exceed 100°C demand closer than 300 mm in front of the stove with a 20 mm base.
Floor directly beneath the stove with 20 mm base does not exceed 65K or 100°C
Height Requirements
The WIKING Mini has a smoke outlet at the top and at the back . It can be installed with an
approved smoke pipe and a steel chimney, or connected to a brick chimney with a fullform
smoke pipe .
Connection to the Chimney
The chimney must be of a proper height to ensure that the draft is sufficient and that smoke
does not become bothersome . If the chimney is so high that it cannot be cleaned from the
top, an easily accessible cleaning hatch must be installed . We recommend, however, that you
always contact your local chimney sweep before purchasing a chimney .
Make sure that the chimney is tight and that no false draft is caused around neither the cover
plate, in connection with a covered smoke outlet, nor the cleanout door and pipe connections .
Please note that bent and/or horizontal smoke pipes will reduce the effect of the chimney draft .
Requirements for Chimney and Smoke Pipe
Nominal draft: Approximately 12 Pascal/1.2 mm water gauge.
Minimum clearance: Ø125 or Ø150 mm, depending on the threaded hose connection of your
WIKING wood-burning stove . The clearance inside the chimney must at least be of the same
diameter as the threaded hose connection .
Smoke pipe and chimney must always be suitable for a stove connection . Ask your WIKING
dealer for more information .