background image

 

Safety 

Before you ride your bike for the first time, familiarize yourself with the 
location and operation of both brakes and steering attributes  

Always check to make sure that all nuts are secured each time before 
you ride in order to make sure the box is stable 

Make sure the seat post bolt is securely fastened and that the seat post 
does not slip before you ride 

Never operate the bicycle if the frame, wheels or quick releases are 
damaged 

Proper maintenance and adjustment of the box bicycle will greatly 
increase riding safety and performance 

Always check your tires for proper inflation (25-40psi) that is indicated 
on the tire’s sidewall 

Reflectors alone are not adequate for riding at night. Front and rear 
lighting systems are recommended to increase visibility 

Always wear a helmet when riding the bicycle 

The bicycle is designed for users of all sizes. However box bikes should 
not be operated by children and young adults 

Remember to comply with all bicycle safety laws and use common sense 
especially in adverse weather condition 

Wike takes no responsibility for accidents resulting from failure to 
comply with all bicycle safety laws, careless driving or improper 
maintenance of your box bicycle 

 

 

 

3. 

Summary of Contents for CARGO TRIKE









Reviews: