Assemble the wheel sets
1.
Assemble the fenders on the sides of the front frame as shown in
in Figure 3.
2.
After screwing the disc rotor to the wheels. Place the front
wheels in the drop-outs (frame slots) and tighten axle bolts on
the two sides of front frame and tighten lock nut.
3.
Put the disc brake over the rotor and fasten to the mounts. To
align have brake loosely fitted to mount, while brake is engaged
tighten bolts with spacers provided (Figure 4.)
4.
Lateral adjustment of brake pads is achieved by turning the red
adjustment knob
5.
Tube valves need a Presta compatible bicycle pump to inflate
5.
