WIKA Intelli Therm TGT73.100, Operating Instructions Manual

Page: 12 / 92

EN
14028755.03 02/2021 EN/DE/FR/ES
12 WIKA operating instructions model TGT73
4.2 Scope of delivery
Cross-check the scope of delivery with the delivery note.
5. Transport, packaging and storage
5.1 Transport
Check the gas-actuated thermometer for any damage that may
have been caused by transport. Obvious damage must be reported
immediately.
5.2 Packaging
Do not remove packaging until just before mounting.
Keep the packaging as it will provide optimum protection during
transport (e.g. change in installation site, sending for repair).
5.3 Storage
Permissible conditions at the place of storage:
Storage temperature: -40 … +70 °C (EN 13190) without liquid damping
-20 … +70 °C (EN 13190) with liquid damping
Avoid exposure to the following factors:
■
Direct sunlight or proximity to hot objects
■
Mechanical vibration, mechanical shock (putting it down hard)
■
Soot, vapour, dust and corrosive gases
■
Potentially explosive environments, flammable atmospheres
Store the gas-actuated thermometer in its original packaging in a
location that fulfils the conditions listed above. If the original packaging
is not available, pack and store the thermometer as described below:
1. Wrap the instrument in an antistatic plastic film.
2. Place the instrument, along with shock-absorbent material, in the
packaging.
3. If stored for a prolonged period of time (more than 30 days), place a
bag containing a desiccant inside the packaging.
4. Design ... / 5. Transport, packaging and storage