15
Operating instructions, Hydraulic compression force transducers
EN
ADPR1X914105.01 04/2019 EN/DE
Display
Bar graph display
Unit
Full scale
Max. value
Min. value
Main display
Special function
2nd display
Tare
Battery charge-level
indicator LO-BAT
Min / Max memory
The min./max. memory is reset to the current measured value with each measuring
cycle.
■
The display of the Min. value is achieved by pressing the Min. key.
■
The display of the Max. value is achieved by pressing the Max. key.
■
The resetting of the current measured value is achieved by holding down the respec-
tive key (Min or Max) and additionally briefly pressing the Menu key.
Bar graph with drag pointer function
The additional integrated bar graph with drag-pointer function within the display indica-
tes the trend of the current working pressure directly, independently from the digital
display. Using the drag-pointer function, the max. memory value is also displayed in the
bar graph display in the form of a bar segment, as well as in the digital display. On reset-
ting the min./max. value, this bar graph is then updated to the current measured value.
Voltage supply
The digital pressure gauge is operated with 2 AA Mignon batteries. The status of the
batteries is shown in the display . With a low battery charge level, a blinking battery
symbol is shown on the indicator display - the batteries should then be changed as soon
as possible.
■
Open the battery cover of the digital pressure gauge on the rear of the instrument.
■
Replace the batteries with 2 new mignon cells.
■
Close the battery cover again.
5. Commissioning, operation
