WIFO K54A-I, Manual And Safety Instructions

Page: 6 / 32

4
Keep at least 150 mm of the fork positioner of the folding
fork in the slot and secure the same using the two bolts
and lock nuts (140Nm).
Operate the box rotator from the driver’s seat of the
forklift/tractor only.
Park the forklift truck / mast with the box rotator in the lowest position only. Make sure that unexpected
movements are ruled out if the forklift truck / tractor is not being used. Place the box rotator on its back on a
flat, stable surface after it has been removed from the forklift truck / mast for storage.
For tilting work, use only durable boxes with flooring or grooves.
Make sure the operating lever for rotating is not mixed up with any other operating lever to prevent
inadvertent tilting or side-shifting. Only the side-shift function remains in the event of a power cut while
operating an electrically controlled valve. Disable the tilting motion by closing the ball valve next to the
balancing valve. Unintentional operation is no longer possible.
Make sure the hydraulic hoses and any power cables do not get jammed and that the box rotator is able to
move freely.
During the controlled tilting action, be aware of the back-tilt moment of the rotating cylinder.