Copyright
©
Norbert Wienold GmbH 2015. All rights reserved.
Glass and Material Lift
GML 800+
4
General Description
Wienold Glass and Material Lift
The consists of a chassis and a mast element
system. The lifting height is defined by the number of mast
elements. The loading capacity is defined by both the model
and the required lifting height.
There are various models with different lifting heights. All
models extend the mast elements sequentially until the
required working height is reached.
The various mast elements drive systems and their
corresponding models are listed below:
a)
per Manual Winch (M Series)
b)
per 230V Electric Winch (AC Series)
c)
per 24V Winch (DC Series)
The 24V Model includes a battery pack and a battery charger.
On AC and DC models, an automatic mast limit switch
ensures an automatic deactivation of the lifting movement
when the maximum lifting height has been reached and
this switch also controls the cable tension when lowering.
The is equipped with frontal outriggers which,
depending on the model, may also be deployed as rear
outriggers when used in combination with counterweights.
Different loading accessories are used to raise, lower,
hold and load up to the Safe Working Load (SWL).
A lifting fork or a crane outrigger are generally available as
loading accessories. These can be easily substituted.
Minor positioning of the lift during operation must always be
done manually.
Transportation of persons with the lift is strictly prohibited!
Do not operate the lift in areas where an explosion hazard
exists.
BEFORE USE ALWAYS please read and understand:
The safe working load (SWL) of all components must be checked before use.
The lowest SWL is always relevant!
Example 1:
Example 2:
Lift:
800 kg SWL max.
Lift:
800 kg SWL max.
Boom:
450 kg SWL max.
Boom:
450 kg SWL max.
Suction Cups: 450 kg SWL max.
suction Cups: 250 kg SWL max.
= 450 kg SWL max.
= 250 kg SWL max.
Always follow the instructions of the load capacity chart!
