All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
25
4.0. Connecting to the Tractor
4.5. Ballast
ATTENTION:
Specifications in the
Operating Instructions for
the tractor must be
observed.
When mounting equipment at
the rear, always ensure there
is sufficient front axle
load; steering must remain
supported. Loads must always
be attached to the mounting
points provided in accordance
with regulations.
When selecting the front axle
load, ensure that the
permissible axle load weight,
as well as the permissible
overall weight including the
mounted equipment, is not
exceeded.
4.6. Electric connection to battery
Only appropriately qualified
professionals may carry out the
connection work.
Mount 3-pin socket (A) at a
suitable location in the area
of the driver's seat.
Install cable (B) from the
battery to 3-pin socket (A).
Insert flat connector
(C)
of
line 1 in socket
(A)
at
position
(D)
.
Insert flat connector
(E)
of
line 2 in socket
(A)
at
position
(F)
.
Insert flat connector
(G)
of
green/yellow line in socket
(A)
at position
(H)
.
Connect ring shoe of lines 1
and 2 to positive terminal of
battery.
Connect ring shoe of
green/yellow line to negative
terminal of battery.
The lines are fused as follows:
Line 1 with 25 A
(K)
Line 2 with 10 A
(L)
