All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
13
2.0. Assembly
2.1. General Information
Only carry out attachment on
firm, even ground.
For this work, please use
your personal protective
equipment (PSA) such as:
gloves, goggles, ear
protectors.
The machine must only be
attached when the engine is
shut off and the PTO shaft
drive is switched off.
The warning and information
signs on the machine contain
important information to
ensure safe operation.
Observe these instructions
for your own safety.
2.2. Mounting three-point frame
Secure mounting frame (A) using
locking bolt (B) and screw in
screw (C) as an anti-twist
device.
Swivel mounting frame (A)
upwards and secure using
screw (D) at the mounting
brackets of the basic unit.
Screw bar (E) onto mounting
frame (A) via the slotted hole
Screw on stud bolts (F) at the
front mounting brackets of the
basic unit as shown in figure
515.04.
