All information, illustrations and specifications in these Operating Instructions are based on the latest information available at the time of
publication. We reserve the right to make design changes at any time without prior notification
23
4.0. Connecting to the Tractor
4.1. General Information
CAUTION !
Switch off the engine
before performing any
work. The ignition key
must be removed.
Secure the tractor
against rolling away.
The following is required for
attaching the machine:
•
Tractors with at least 9 kW
(12 hp)
•
Hydraulic three-point hoist
cat. 1
or
•
connection point for drawbar
4.2. Installation with three-point hitch
Mount lower guide bar to
pins (A) and secure.
Insert upper guide bar (C)
using pin (B) to three-point
frame (B) and secure.
Firmly tighten turnbuckles of
the stabilising chains.
Lift mounted machine using the
tractor rear hydraulic system.
Lift the parking supports.
Release and remove locking bolt
(C) for this purpose.
Slide parking support (D) to
the topmost position and insert
and secure there using locking
bolt (C).
