All information, illustrations and specifications in this manual are based on the latest information
available at the time of publication. We reserve the right to make changes at any time without notice.
27
4.0. Connecting to the Tractor
4.1. General
Attention:
Mount the machine only with
the engine shut off and the
PTO switched off.
Mount the machine only with
the engine shut off and the
PTO switched off.
The signboards applied on the
machine show important
warnings and directions for
safe operations.
Observe these signs for your
safety.
Check the engine speed and
sense of rotation (stickers on
the machine) against the
specifications of your
tractor. The stickers specify,
to which engine speed and sense
of rotation the machine has
been set.
4.2. Installing on the tractor
The standard use of the blower
is for mounting on a three-
point linkage, category 1.
1.
Attach bottom connecting rod
to both pins (A) and secure.
2.
Attach top connecting rod
with pin (B) to the bore
matching the tractor type and
secure.
3.
The adjustment is made with
the top connecting rod.
NOTE
When mounting, ensure that
the blower is parallel to the
contact surface of the tire.
4.
Connect hydraulic lines to
tractor.
5.
Attach universal shaft as
directed by the manufacturer.
