manualshive.com logo in svg

Wiedenmann Mega Twister, Translation Of Original Operating Instructions

Share
Download
Wiedenmann Mega Twister Translation Of Original Operating Instructions Download Page 11

All information, illustrations and specifications in this manual are based on the latest information  

available at the time of publication. We reserve the right to make changes at any time without notice.

 

11 

1.0. Safety 

1.1. SAFETY DECALS 

Pictorial safety signs

 

At several important places on this 
machine safety signs are affixed in 
order to signify potential danger. 
The hazard is identified by a 
exclamation point in a warning 
triangle. An adjacent pictorial 
provides information on how to 
avoid personal injury. These safety 
signs, their placement on the 
machine and a brief explanatory 
text are shown below. 
 
 
 
 

Operator’s manual

 

This operator’s manual contains 
all important information 
necessary for safe machine 
operation. 
Carefully observe all safety 
rules to avoid accidents.  

 

 
 
 
 
 
 
 
 

Swiveling range 

Due to danger of crushing, 
never put your hands in danger 
areas as long as components are 
still moving. 
 
 
 
 
 
 
 
 

891.01

 

891.02

 

Summary of Contents for Mega Twister


























































Reviews:

No comments

Brands by name

Popular brands

Load more brands