All information, illustrations and technical specifications in this publication correspond to the latest version as per the
time of publishing. Constructions and designs are subject to modifications without prior notice.
26
6.0. Maintenance
6.3. Cleaning
CAUTION DANGER
Clean with a hand brush
or water only never with
your bare hands.
RISK OF INJURY !
Clean the machine daily after the
work is finished to ensure
faultless functioning when it is
next used.
Only cleaned cylinder brooms
ensure optimal functioning.
6.4.
Check and tension the drive V-belts
•
Release screw (A)
•
Remove protective cover (B)
•
Release locknut (C)
Check V-belt tension on a
regular basis.
The V-belt must press between
the belt pulleys by about
3,4 mm at a load of 250 N.
•
Insert screw (C) until
the values for the
correct V-belt tension
are reached.
•
Attach protective
cover (B) and secure
using screw (A)
3,4 m
m
250 N
2350.39
