Ku nst sto ffschweißtec hni k
Operating and indicating elements
Chapter 4
27.10.2011
Working Instructions WIDOS 6100 CNC 3.0
Page 19 of 76
4.4. Elements on the heating element and the planer
Name
Function
Heating element:
Control lamps,
green
There are 3 different states:
•
lightening,
only interrupted by short switch-off pulses: the heating
element is being heated up, the desired temperature is not yet reached.
The desired and the actual temperature are displayed alternating on the
display of the control.
•
blinking:
the temperature of the heating element is maintained by a
pulse-position ratio.
•
off:
the desired temperature has been exceeded, the
heating element is cooled automatically onto desired temperature, or
the heating element is switched off.
Cable
- Connect the heating element at the corresponding plug box (chapter
4.1, no. 12) on the CNC control unit.
Eye bolt
- For lifting / inserting the heating element / planer with the lift-off device.
Grip
- For holding (transporting) the heating element when lifting / removing
Planer:
On/off-switch
- During the planing process the planer has to be switched on at the
switch. The planing process is operated by the CNC control.
Cable
- Connect the planer at the corresponding plug box (chapter 4.1, no. 13)
on the CNC control unit.
Handlebar
- For holding (transporting) the planer when lifting / removing
Locking device
- Locking the planer in basic machine, (In order to remove the planer, pull
handlebar into arrow direction
Control lamps green (3 pieces)
Connecting cable
with 16-pole plug
On- / off-switsch
Connecting cable with
plug 16 A CEE
Locking device
Eye bolt
Eye bolt
Grip
Handlebar
