Ku nst sto ffschweißtec hni k
Safety rules
Chapter 2
27.10.2011
Working Instructions WIDOS 6100 CNC 3.0
Page 15 of 76
2.8.4.
Danger of being burnt by heating element and welding area
You can burn parts of your body and inflammable materials can also be ignited!
The heating element is heated up to more than
200°C
!
•
Do not touch the surfaces of the heating element.
•
Do not leave the heating element unsupervised.
•
Take enough safety distance to inflammable materials.
•
Do wear safety gloves.
•
Always put the heating element back into the reception box after and before each use.
•
Only transport the heating element at the handle.
2.8.5.
Danger of squeezing by clamping devices and guideways
There is a danger of serious injuries: on the one hand between the inner clamping
devices and on the other hand between the outer clamping device and the end of
the guideway.
•
Do not stand or put hands between clamped pipe ends.
•
Do not stand or put hands between the inner clamping tools with not yet clamped pipes.
•
Do not block opening and closing of the machine sledge.
2.9. Structural modifications on the machine
•
No modifications, extensions or reconstructions may be made on the machine without
permission of the manufacturer. In cases of non-compliance, any guarantee and liability
demands shall expire (see chapter 2.5).
•
Machine parts which are not in a perfect condition are to be replaced immediately.
•
Only use original
WIDOS
spare and wear parts.
•
In case of purchase orders please always state the machine and version number !
2.10. Warranty and liability
Fundamentally our "General Sales and Delivery Conditions" are valid.
They are at the owner's disposal latest when signing the contract.
Guarantee and liability demands referring to personal injuries or damages on objects are
excluded if they are caused by one or several of the following reasons:
•
not using the machine according to the prescriptions
•
inexpert building-up, starting, operating, maintenance and transport of the machine
•
running the machine with defective or not orderly mounted safety appliances
•
ignoring the information given in this manual
•
structural modifications on the machine without permission
•
unsatisfactory checking of parts of the machine, which are worn out
•
repairs performed in an inexpert way
•
In case of catastrophes and force majeure
