Page of
7
7
LEFT:
Detail of single cable
grip on inside of tyre
RIGHT:
Detail of two cable grips
on outside of tyre
16. Secure the Tyre Buffer Assemblies (C) to the Cable using three cable grips (Z) for each tyre - two on the outside one on the inside of tyre wall nearest main support stations. Note: Cable grips
are not to be fitted to tyre wall where cable runner impacts. Ensure that the stop dimensions illustrated on page 6 are achieved when the Tyre Buffer Assemblies are fixed in position as
shown below
17. Please ensure the tensioning bar is left with the
client so they can use it in the future when the sag in
the rope becomes too much.
19
