2
INTRODUCTION
Description
The Thermostatic Power Shower is an all-in-one power shower with
an integral mains voltage pump, with separate controls for flow and
temperature. It features a 15mm dual entry push-fit manifold to
enable the appliance to support various inlet supply configurations.
The manifold includes inlet filters and check valves. The
thermostatic mixer incorporates a wax capsule sensing unit and
ceramic disc technology for flow control.
Designed to be surface mounted the Thermostatic Power Shower
comes complete with an adjustable spray handset with three
settings, flexible hose, adjustable slider, soap dish, sliding rail and
bracket.
WARNING!
This appliance must be earthed.
The shower unit
must not
be connected to a Mains Cold water
supply, Unvented High Pressure systems or Multi-Point/
Combination Gas Water Heaters.
The function of a thermostatic mixing valve is to deliver water
consistently at a safe temperature. In keeping with every other
mechanism, it cannot be considered as functionally infallible and
as such, cannot totally replace a supervisor’s vigilance where that
is necessary. Provided it is installed, commissioned, operated and
maintained within manufacturers recommendations, the risk of
failure, if not eliminated, is reduced to the minimum achievable.
