3. Enter the password with the keypad and press the Enter button.
Reenter the password and press the Enter button.
You can use up to 7 alphanumeric characters for a password but you cannot use special characters.
4. When a message confirming the password configuration appears in the [Setup Notice] window,
press <Enter>.
The supervisor password has been set. The supervisor password is required to turn the product on or
to enter System Setup.
2. Setting a User Password
Users can start the system with a user password, but cannot enter the System Setup. By doing this, you can
prevent other users from entering Setup.
Before configuring a user password, a supervisor password must have been configured. Deactivating the
supervisor password also deactivates the user password.
In the Set User Password item, press <Enter> and complete the procedures of Step 3 of Setting a Supervisor
Password.
Activating the Booting Password Before activating the booting password, a supervisor password must have been
configured.
Set the Password on boot option to Enabled. From now on, system booting will not proceed without the password.
3. Deactivating the Password
1. On the password to be deactivated, press <Enter>. For example, to deactivate a supervisor password in
the Set Supervisor Password item, press <Enter>.
2. In the Enter Current Password item, enter the current password and press <Enter>.
3. Leave the Enter New Password item field empty, and press <Enter>.
4. Leave the Confirm New Password field empty, and press <Enter>.
5. In the [Setup Notice] window, press <Enter>. The password is deactivated.
37
