Ɣ
Regulatory Compliance Statements
م͑
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the
2.4GHz Band, may be present (embedded) in your notebook system. The following section is a general overview
of considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections
(or country group sections). The wireless devices in your system are only qualified for use in the countries
identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless
device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are
closely regulated and use may not be allowed.
The RF field strength of the wireless device or devices that may be embedded in your notebook are well below all
international RF exposure limits as known at this time. Because the wireless devices (which may be embedded
into your notebook) emit less energy than is allowed in radio frequency safety standards and recommendations,
manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
This transmitter must not be collocated or operate in conjunction with any other antenna or transmitter except the
installed Bluetooth transmitter.
Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
͑
Caution
Ŷ
Radio frequency wireless communication can interfere with equipment on commercial aircraft. Current
aviation regulations require wireless devices to be turned off while traveling in an airplane.
802.11B (also known as wireless Ethernet or WiFi) and Bluetooth communication devices are examples of
devices that provide wireless communication.
Ŷ
In environments where the risk of interference to other devices or services is harmful or perceived as
harmful, the option to use a wireless device may be restricted or eliminated. Airports, Hospitals, and
Oxygen or flammable gas laden atmospheres are limited examples where use of wireless devices may be
restricted or eliminated. When in environments where you are uncertain of the sanction to use wireless
devices, ask the applicable authority for authorization prior to use or turning on the wireless device.
Ŷ
Every country has different restrictions on the use of wireless devices. Since your system is equipped
with a wireless device, when traveling between countries with your system, check with the local Radio
Approval authorities prior to any move or trip for any restrictions on the use of a wireless device in the
destination country.
Ŷ
If your system came equipped with an internal embedded wireless device, do not operate the wireless
device unless all covers and shields are in place and the system is fully assembled.
Ŷ
Wireless devices are not user serviceable. Do not modify them in any way.
Modification to a wireless device will void the authorization to use it. Please contact manufacturer for
service.
Ŷ
Only use drivers approved for the country in which the device will be used. See the manufacturer
System Restoration Kit, or contact manufacturer Technical Support for additional information.
13
Ɣ
Wireless Guidance
Low power, Radio LAN type devices (radio frequency (RF) wireless communication devices), operating in the
2.4GHz Band, may be present (embedded) in your system. The following section is a general overview of
considerations while operating a wireless device.
Additional limitations, cautions, and concerns for specific countries are listed in the specific country sections
(or country group sections). The wireless devices in your system are only qualified for use in the countries
identified by the Radio Approval Marks on the system rating label. If the country you will be using the wireless
device in, is not listed, please contact your local Radio Approval agency for requirements. Wireless devices are
closely regulated and use may not be allowed.
The RF field strength of the wireless device or devices that may be embedded in your product are well below all
international RF exposure limits as known at this time. Because the wireless devices (which may be embedded
into your product) emit less energy than is allowed in radio frequency safety standards and recommendations,
manufacturer believes these devices are safe for use. Regardless of the power levels, care should be taken to
minimize human contact during normal operation.
This transmitter must not be collocated or operated in conjunction with any other antenna or transmitter except the
installed Bluetooth transmitter.
Some circumstances require restrictions on wireless devices. Examples of common restrictions are listed below:
