12
Operators Manual
Trusted by the best
Fig 2
Positive Wire
Work clamp
Gun cable
(-) output
terminal
(+) output
terminal
Polarity selection cable
Fig 3
Negative Wire
(-) output
terminal
(+) output
terminal
Work
clamp
Gun
cable
Polarity
selection cable
Supply Cable
If it becomes necessary to replace the mains
flexible supply cable, use only cable with
correct current rating.
The replacement cable must be fitted and
retained in the same manner as the original.
Output Voltage Polarity
The design of the Weldmatic allows selection
of the output voltage polarity.
Positive Wire
MIG welding (GMAW), with solid
consumable wires and gas shielding, is
carried out with the work piece Negative and
the welding wire Positive.
To setup for this condition, connect the
‘WORK’ lead plug into the (-) output terminal
on the power source, and the Polarity
Selection Cable from the power source into
the (+) output terminal, as in Figure 2.
Negative Wire
Some ‘self-shielded’ flux cored gasless
consumable wires are operated with the
work piece Positive and the consumable wire
Negative. Refer to the manufacturers data for
the particular consumable wire to be used.
To setup for this condition, connect the
‘WORK’ lead plug into the (+) output
terminal on the power source, and the
Polarity Selection Cable from the power
source into the (-) output terminal, as in
Figure 3.
