- 9 -
the default "automatic dialing".
》
always on
：
the ONU automatically initiates PPPOE dialing
after OLT is on line
》
required ON
：
When a data transmission request is made, the
PPPOE channel is automatically established, and the
connection of the PPPOE is automatically disconnected after
20 minutes by default.
IP Version
Default IPv4.Option IPv6,IPv4/IPv6
PPP TransType
Link type select ppp.Default PPPoE
Enable NAT
IP Version select IPv4 or IPv4/IPv6.Default open
■
Internet access mode settings, Connection mode is PPPOE
1 always on
always on : Internet access means PPPOE dial-up automatically when the ONU is
turned on. When the dial-up is successful, PC and other terminals can connect to
the ONU to access the Internet without PC and other terminals to do Internet
dial-up again.
entry
“
network
”
-->
“
WAN
”
-->
“
WAN Connection
”，
connection type PPP
；
connection trigger
“
always on
”，
input username and password
。
The PC is connected to the ONU through the network cable. It does not need to dial
on the PC. It only needs to configure the PC network card to "obtain an ip address
automatically" to access the Internet.
