background image

 
 

- 1 - 

 

 

1

 

Safety reminder

 

Please read all safety precautions carefully before using ONU

As follows

 

 

ONU is usually used in FTTH application

 

 

Do not look directly at the optical fiber interface on ONU to avoid eyes   

      impairment

 

 

Do not let children play with ONU and accessories to avoid dangerous   

      behavior

 

 

the supply voltage of ONU must meet the requirements of equipment input   

      voltage

 

 

Prohibit the use of non-standard power adapters to avoid affecting the normal   

      use of ONU or introducing security risks. 

 

If the power adapter is damaged or broken, do not use immediately to avoid   

      Risk. 

 

Please prevent foreign bodies 

especially water or other liquids

  from   

      entering equipment through the aperture, so as to avoid causing equipment 
      failure, thereby introducing safety risks

 

 

When using the ONU, keep hands dry, and disconnect power supply first.

 

 

In thunderstorm weather, please disconnect the ONU power supply and pull 
out all cables connected to the light cat, such as power cord, power adapter, 
net cable and fiber cable, in order to avoid damage or personal injury

 

 

Please install the ONU in strictly accordance with the requirements. Keep 
distance more than 10 cm to heat radiation. Avoid storing flammable 
materials around the ONU and keep away from the space with strong 
magnetic or electric fields, such as microwave ovens and refrigerators

 

 

Do not place anything on the ONU

 

 

Do not disassemble the ONU by yourself. If the ONU fails, please contact   

      the designated maintenance point.

 

 

Please abide by the relevant local laws and regulations about the using of   

      ONU and support recycling actions

 

 
 
 
note

 

Please  read  the  above  instructions  carefully  before  using  the  ONU.  Users  are 
responsible for any accident caused by using the ONU not in accordance with the 
above instructions.

 

 
 
 
 
 
 

Summary of Contents for FTTH ONU EQUIPMENT


























Reviews: