PARTS & FEATURES
Scoop
Measuring cup
Control panel
Blender blade
Removable bowl
Refill lid
Transparent lid
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packing.
Before connecting the appliance to the power source, let it stand upright for approximately 2 hours.
This will reduce the possibility of a malfunction in the cooling system from handling during
transportation.
Wash all parts that will come into contact with the ice cream (including the fixed bowl, removable
bowl, blender blade, transparent lid, refill lid, measuring cup and scoop).
PREPARE RECIPE INGREDIENTS
Prepare recipe ingredients from your own recipe or from ours, and pour the mixture into the removable
bowl. Note: No pre-freezing is needed, as this appliance has a built-in compressor which is designed to
freeze the mixture in between 30
– 60 minutes.
INSTALLATION OF YOUR APPLIANCE
Important:
Always place the Ice Cream Maker upright on a flat, level and solid surface.
1) Place the removable bowl into the fixed bowl inside the body of the appliance.
2) Insert the blender blade into the motor axis in the middle of removerable bowl. (see picture below).
