background image

                                                                                                                             

 

SAFETY INSTRUCTION 

 

WARNING! 

Use this appliance only for its intended purpose as described in this Owner’s Manual. 

 

SAFETY PRECAUTIONS 

When using electrical appliances, basic safety precautions should be followed, including the following: 

 

This water dispenser must be properly installed and 
located in accordance with these instructions before 
it is used. 

 

Do not allow children to climb, stand or hang on the 
outside of the dispenser. The dispenser could tip 
over and get damaged and seriously injure 
somebody. 

 

Do not store or use gasoline or other flammable 
vapors and liquids in the vicinity of this or any other 
appliance. 

 

Unplug the water dispenser before cleaning and 
making repairs. 

Note: We strongly recommend that any servicing 
be performed by a qualified individual. If your 
WHYNTER water dispenser requires servicing or 
you have technical questions, please contact 
our service department. 

 

Do not use this dispenser to dispense anything other 
than water.

 

 

 

Do not plug in the power cord or turn on the power 
switches when the water dispenser is empty.

 

 

Never turn the water dispenser upside-down or tilt it 
more than 45º.

 

 

Wipe up any water spills immediately after loading 
or unloading water bottles.

 

WARNING:

 

Do not use with water that is 

microbiologically unsafe or of unknown quality 
without adequate disinfection.

 

 

This water dispenser heats water to approximately 
90ºC / 194ºF. Water temperatures above 52ºC/ 
125ºF can cause severe burns. Please operate the 
water dispenser carefully. 

 

 

 

 

 

 

GROUNDING INSTRUCTIONS 

 

WARNING-

 improper use of the grounding 

plug can result in a risk of electric shock. 

 

This appliance must be grounded. In the event 
of an electrical short circuit, grounding 
reduces the risk of electric shock by providing 
an escape wire for the electric current. 

 

This appliance is equipped with a power cord 
which contains a grounding wire with a 
grounding plug. The plug must be plugged into 
an outlet that is properly installed and 
grounded. 

 

Consult a qualified electrician or service 
technician if the grounding instructions are 
not completely understood, or if doubt 
exists as to whether the appliance is 
properly grounded. 

                                                                                                                                                   

 

If the outlet is a standard 2-prong wall outlet, it is your 
personal responsibility and obligation to have it 
replaced with a properly grounded 3-prong wall outlet. 
 
Do not under any circumstances cut or remove the 
third (ground) prong from the power cord. 
 
Do not use an adapter plug with this appliance. 
 
Do not use an extension cord with this appliance. If 
the power cord is too short, have a qualified 
electrician or service technician install an outlet near 
the appliance. 
 
For best operation, plug the appliance into its own 
electrical outlet on a dedicated circuit to prevent 
flickering of lights, blowing of fuse, or tripping of circuit 
breaker. 

 

 

 

 
 
 

Summary of Contents for FX-7SB










Reviews: