NovoSoft 465 Series
Water Softener Operation Manual
Note:
1. Read all instructions carefully before operation.
2. Avoid pinched o-rings during installation by applying (provided with install kit) NSF certified lubricant to all seals.
3. Unit is factory set
for “Clean Water” application. See factory settings for “Problem Water” on page 10.
4. This system is not intended for treating water that is microbiologically unsafe or of unknown quality without adequate disinfection before or
after the system.
Rev 1, May 28, 2012
Tested and Certified by the Water Quality
Association to CSA B483.1.
Canadian Head Office
655 Park St.
Regina, SK S4N 5N1
Eastern Sales & Distribution
20 Steckle Place, Unit 21
Kitchener ON N2E 2C3
