Page
14
Installation
Instructions
Power Button
Press to turn the air conditioner on and off
Mode Button
Press
to
change mode
•
Controls
the 3
function modes: COOL,
FAN,
and DRY.
Note: In Cooling or Dry mode, press the
Mode
for 3 seconds to turn the Constant Fan function on or off. When the function is turned on, the Constant Fan light will illuminate, identifying
the fan will run continually. When the function is turned off, the Constant Fan light will not illuminate, identifying the fan will run only when the compressor is running.
Up ( + ) and Down ( - ) Buttons
Adjusts set temperature (1°C/ 2°F increments) or timer hours (0 – 24 hours).
This unit is capable of displaying set temperature in Fahrenheit or in Celsius.
To convert from one to the other, press and hold the Up and Down buttons for 3 seconds.
LED Display
•
In Cool mode: shows set temperature in °C or °F and AUTO timer setting.
•
In DRY and FAN only modes: shows room temperature.
Error Codes:
E1 - Room temperature sensor error
-
Unplug unit and restart in 5 minutes
E2 - Evaporator sensor error
-
Unplug unit and restart in 5 minutes
E3 - Condenser sensor error
-
Unplug unit and restart in 5 minutes
E4 - Display panel sensor error
-
Unplug unit and restart in 5 minutes
P1 - Water reservoir full
-
Drain water from the unit
Power Indicator Light
Timer mode indicator light (set
only by remote control)
Control Panel
