![background image](http://html.mh-extra.com/html/whynter/arc-102cs/arc-102cs_instruction-manual_978311011.webp)
Page
11
50cm
50cm
20
inch
50cm
20 inch
20 i
nch
Installation
Instructions
Choosing The Right Location
Recommend Installation
Your installation location should meet the following requirements:
-Make sure that you install your unit on an even surface to minimize noise and
vibration.
-The unit must be installed near a grounded plug, and the Collection Tray Drain
(found on the back of the unit) must be accessible.
-The unit should be located at least 20" from the nearest wall to ensure proper air
conditioning. The horizontal louver blade should be at least 20" away from obstacles.
-DO NOT cover the Intakes, Outlets or Remote Signal Receptor of the unit, as this
could cause damage to the unit.
50cm
19.7 inch
Energy Rating Information
How to Stay Cool with a New Portable Air Conditioner
Because of a new federal test procedure for Portable Air Conditioners, you may notice that the
cooling capacity claims on portable air conditioner packaging are significantly lower than that of
models produced prior to 2017. This is due to changes in the test procedure, not to the portable
air conditioners themselves.
We recommend that operating the unit at a room temperature below 95°F with the exhaust hose extended to the
shortest length possible and ensuring the exhaust hose diameter is not blocked or covered. Extending the exhaust
hose greater than 9' or blocking the exhaust hose diameter or any of the vents on the unit will reduce its efficiency.
MODE
Temperature Range
Recommended
Ambient Temperature Range For Unit Operating
Cool
17-35°C (62-95°F)
Dry
13-35°C (55-95°F)
Exhaust Hose Installation
The exhaust hose and adapter must be installed or removed in accordance with the usage mode. For COOL
or AUTO mode, the adapter and exhaust must be installed. For FAN or DRY mode, the adapter and exhaust
can optionally be removed.