On the amp, unscrew the red plug that does not already have a speaker wire attached until you see
the hole on the post. See Figure 12. Insert the red-tipped speaker wire that is connected to the left
speaker into the hole in the red post and tighten the cap until the wire end is covered. Do not
over-tighten. Repeat for the black post/wire. See Figure 12.
12.
Fig. 12
Page 9 — 1321/1330/AFGAC — 12/08
TO WIRE THE SPEAKERS:
The easiest way to reach the speakers is by standing inside the bed assembly.
TO WIRE THE LEFT SPEAKER TO THE AMP:
hole properly
exposed in
the red post
Wires already installed by the factory.
