MOUNTING THE EVAPORATOR UNITS
NOTE:
You are
REQUIRED
to use only the mounting locations provided. These locations
ensure that the installer will not drill into any copper or electrical wiring within the system.
It is vital that the units be set apart and oriented so that the return air
from one unit does not recirculate into the supply air of the other unit.
NOTE:
If installing the units without attic access, perform steps 5-2
1
prior to steps 3-4.
1. Display cable
2. Power and thermostat wires
3. Drain line
4. Line set
Routed Items:
Line Set / Drain Line
Display, Power. and
Thermostat Wires
3.
Secure the mounting bracket to the
primary
evaporator unit using the twelve (12) supplied 3/8” Phillips pan-head
screws
.
4.
Secure the
primary
evaporator unit’s mounting bracket to the opening using the twelve (12) supplied 21/2” Phillips-
head screws.
Page 13
08/04/21
