WhisperKool SC PRO 2000, Owner'S Manual

Page: 6 / 32

SC PRO
111519 Page 4 | 1-800-343-9463
NOTE: WhisperKOOL units are manufactured in the USA and tested prior to shipment.
Please leave the WhisperKOOL unit in its original box until you are ready for installation. If the unit is to be stored for any length
of time prior to installation, ensure that the unit is stored on a flat level surface in the upright position. This will allow you to
move the product safely without damaging it. When you are ready to remove the product from the box, refer to the installation
instructions.
TIP: Save your box and all packaging materials. They provide the only safe means of transporting/shipping the unit.
2000 / 3000 / 4000
Single-piece mounting bracket
Accessory kit #1:
• (1) WhisperKOOL SC Series owner’s manual
• (1) Bypass plug
• (1) Liquid-measuring thermostat (bottle probe)
Accessory kit #2:
• (1) Power cord (8 feet)
• (1) Piece of mounting bracket insulation foam (6feet)
• (11)1¾" standard screws
• (7) 1/2" Phillips pan-head screws
• (1) Drain line tube (1/2" ID clear plastic tubing, 10 feet)
• (1) 1/4” FNPT x ½” Hose Elbow
RECEIVING AND INSPECTING THE UNIT
Upon receiving your WhisperKOOL unit:
• Lift only at the designated hand-hold locations on the shipping container, or fully support the unit from underneath.
A shipment may include one or more boxes containing accessories.
• Inspect the packaging for any obvious signs of damage or mishandling before opening the container.
• Place the box containing the WhisperKOOL unit on a tabletop to prepare it for testing prior to installation.
• Review the packing slip to verify the package’s contents.
• Check the model number to ensure it is correct.
• Check that all factory options ordered are listed.
• Check the box for the following: