GENERAL INFORMATION
8
M-GV/2, M-GV/3, M-GV/3+, M-GV 8, M-GV 10, M-GV 12 and M-GV 15
Ͷ
May 2018
Ͷ
EN
2.3.3
Control
The Digital Control system of the genverter is based on
microprocessor technology. Several operating modes and
automatic start/stop functions can be programmed and
monitored (refer to Digital Diesel Control
ƵƐĞƌ͛ƐŵĂŶ
ual).
All functions can be set from the remote control panel, which
comes as standard with the genverter, including a 15 m cable.
2.3.4
Installation
The genverter is not self-contained and is only operable after
proper installation using additional accessories and installation
materials such as a starter battery, fuel supply and an exhaust
system.
Installation accessories are listed in the installation manual and
are available through the supplier of the genverter.
2.3.5
Documentation
Included in the delivery are:
x
This
ƵƐĞƌ͛ƐŵĂŶƵĂů
(no. 40200741)
x
An installation manual (no. 40200751)
x
A DDC operating manual (no. 40200801)
x
A DDC quick reference guide (no. 40200142)
dŚĞƵƐĞƌ͛ƐŵĂŶƵĂů
contains a list of important maintenance and
spare parts as well as a chapter on maintenance and problem
solving. Manuals in other languages are available on request.
