WHISPER KOOL Quantum SS12000 Owner'S Manual Download Page 2

Page: 2 / 40

021616

regard to the hardware and manual are subject to the restrictions and limitations imposed by the copyright laws of the USA.

Under copyright laws, this manual may not be copied, reproduced, translated, transmitted, or reduced to any printed or electronic

medium or to any machine-readable form, for any purpose, in whole or in part, without the written consent of WhisperKOOL.

Every effort has been made to ensure that the information in this manual is accurate. WhisperKOOL is not responsible for printing

or clerical errors.

WhisperKOOL reserves the right to make corrections or improvements to the information provided and to the related hardware at

any time, without notice.

Mention of third-party products is for informational purposes only and constitutes neither an endorsement nor a

recommendation. WhisperKOOL assumes no liability with regard to the performance or use of these products.

REV 02

We manufacture, test and certify 100% of our wine cooling units

in the USA. We strive to manufacture the highest-quality cooling

systems in the industry by sourcing the best components and closely

controlling our manufacturing processes. Continuous improvement

is consistently our focus at WhisperKOOL as we make great efforts to

have the highest customer satisfaction rates in the industry.

Conforms to ANSI/UL Std 427

Certified to CAN/CSA Std C22.2 No. 120

Summary of Contents for Quantum SS12000









































Search results

Summary of Contents for Quantum SS12000

Reviews:

Brands by name

Popular brands

WHISPER KOOL Quantum SS12000, Owner'S Manual

Search results

Summary of Contents for Quantum SS12000

Reviews:

Brands by name

Popular brands