background image

3

Energy efficiency

Energy efficiency is gained by extending cycle time and  

reducing the amount of wattage and water used during  

your dishwasher’s cycle. For exceptional cleaning, cycles  

are longer due to the soak and pauses.
Efficient dishwashers run longer to save water and energy, just as 

driving a car slower saves on gas. Your first cycle will run longer to 

calibrate the optical water sensor.

Press Start/Resume every time you add  

a dish

IMPORTANT:

 If anyone opens the door, such as for  

adding a dish (even during the Delay option), Start/

Resume must be pressed each time.
Push door firmly closed within 4 seconds of pressing 

Start/Resume. If door is not closed within 4 seconds, the 

Start/Resume button LED will flash, an audible tone will 

be heard, and the cycle will not start.

OPERATING YOUR DISHWASHER

1. 

Prepare and load the dishwasher

10-place load – upper rack

10-place load – lower rack

IMPORTANT:

 Remove leftover food, bones, toothpicks, and other hard 

items from dishes. Remove labels from containers before washing.

 

Make sure when dishwasher door is closed, no items are blocking 

detergent dispenser.

 

Items should be loaded with soiled surfaces facing down and 

inward to the spray as shown in the graphics above. This will 

improve cleaning and drying results. Angle dirtiest dish surface 

downward, allowing space for water to flow up through rack and 

between dishes.

 

Avoid overlapping items, like bowls or plates, that may trap food. 

 

Place plastics, small plates, and glasses in upper rack. 

 

Wash only items marked “dishwasher safe.” 

 

To avoid thumping/clattering noises during operation, load dishes 

so they do not touch one another. Make sure lightweight load 

items are secured in racks. 

 

Use slots in the covers and suggested loading patterns to keep 

your silverware separated for optimum wash. 

 

If your silverware does not fit into the designated slots, lift and 

slide covers off to remove them and mix silverware types to keep 

them separated.

 

When loading silverware, always place sharp items pointing down 

and avoid “nesting” as shown. 

2. 

Check that all arms spin freely

Items in the rack can block  

the spray arms.

3. 

Add detergent

Premeasured Detergents

High-quality premeasured tablets  

and packs are recommended for 

improved performance. 
Quality tablets and packs have been 

proven better than powder, liquid, or gel 

detergents at reducing filming on dishes. 

Using tablets and packs over time will 

start to reduce or eliminate white film. 

They are suitable for all water hardness 

and soil levels. Also, by using a rinse aid, 

you can minimize repeat buildup of white 

film (not all packs and tablets contain 

rinse aid). Always place premeasured 

detergents in main compartment and  

close lid. 

NOTE:

 Follow instructions on the package when using other 

dishwasher detergent types. See the complete User Instructions  

for more details about powders, liquids, and gels.

 

Use automatic dishwasher detergent only. Add detergent just 

before starting a cycle.

 

Fresh automatic dishwasher detergent results in better cleaning. 

Store tightly closed detergent container in a cool, dry place.

To close lid

To open lid

SLIDE

SLIDE

Place selected detergent in 

the dispenser. Place finger, as 

shown, and slide lid closed. 

Press firmly until it clicks.

Push OPEN, as shown,  

and the lid will slide open.

SLIDE

Summary of Contents for WDT730PAHZ

















Reviews: