6
Using the Faucet
You can draw water from the faucet while the dishwasher
is connected.
NOTE:
Do not draw water while the dishwasher is filling or
while water is being pumped out. (This helps avoid a low fill
when dishwasher is filling or keeping drain water from mixing
with fresh water when dishwasher is draining.)
10.
Adjust water temperature
Press the red button on the hose connector to draw water from
the faucet. (The faucet is set on hot. Adjust the faucet for the
water temperature you want.)
NOTE:
Turn the hot water back on after you draw water from
the faucet. Turn off the cold water.
DISCONNECT DISHWASHER
Turn off the hot water. (This can be done after the last rinse.)
11.
Disconnect hose from faucet
Press the red button on the connector to release the water
pressure. Lift slightly on the hose connector while pulling down
the locking collar. Pull down on the connector.
Empty any remaining water from the connector by turning the
connector upside down.
12.
Disconnect dishwasher
Unplug the power supply cord and return it to the storage
compartment. Return the hoses to the storage compartment.
Vacation or Extended Time without Use
To Reduce Risk of Property Damage During Vacation or
Extended Time Without Use
■
When you will not be using the dishwasher during the summer
months, turn off the water and power supply to the dishwasher.
■
Make sure the water supply lines are protected against
freezing conditions. Ice formations in the supply lines
can increase water pressure and cause damage to your
dishwasher or home. Damage from freezing is not covered
by the warranty.
■
When storing your dishwasher in the winter, avoid water
damage by having your dishwasher winterized by authorized
service personnel.
