6
6. END OF COOKING
An audible signal will sound and the display will
indicate that cooking is complete.
END
Press
to continue cooking in manual mode (untimed)
or press
to extend the cooking time by setting a new
duration. In both cases, the cooking parameters will be
retained.
BROWNING
Some functions of the oven enable you to brown the
surface of the food by activating the grill once cooking
is complete.
PRESS v TO BROWN
When the display shows the relevant message, if
required press
to start a five-minute browning cycle.
You can stop the function at any time by pressing
to
switch the oven off.
. FAVORITES
Once cooking is complete the display will prompt you
to save the function in a number between 1 and 10 on
your list of favorites.
ADD FAVORITE?
If you would like to save a function as a favorite and
store the current settings for future use, press
otherwise, to ignore the request press
.
Once
has been pressed, press the
or
to select the
number position, then press
to confirm.
Please note: If the memory is full or the number chosen has
already been taken, the oven will ask you to confirm
overwriting the previous function.
To call up the functions you have saved at a later time,
press
: The display will show your list of favorite
functions.
1. CONVENTIONAL
Press
or
to select the function, confirm by pressing
, and then press
to activate.
. SMARTCLEAN FUNCTION
Press
to show “Smart Clean” on the display.
Smart clean
Press
to activate the function: the display will
prompt you to do all actions needed to obtain the best
cleaning results: Follow the indications and then press
when done. Once you have done all steps, when
required press
to activate the cleaning cycle.
Please note: It is reccommended to do not open the oven
door during the cleaning cycle to avoid a loss of water vapor
that could get an adverse effect on the final cleaning result.
An appropriate message will start flashing on the
display once the cycle has finished. Leave the oven to
cool and then wipe and dry the interior surfaces with a
cloth or sponge.
. MINUTEMINDER
When the oven is switched off, the display can be used
as a timer. To activate this function, make sure that the
oven is switched off and press
or
: The
icon will
flash on the display.
Press
or
to set the length of time you require and
then press
to activate the timer.
MINUTE-MINDER
An audible signal will sound and the display will
indicate once the minuteminder has finished counting
down the selected time.
Please note: The minuteminder does not activate any of the
cooking cycles. Press
or
to change the time set on the
timer.
Once the minuteminder has been activated, you can
also select and activate a function.
Press
to switch on the oven and then select the
function you require.
Once the function has started, the timer will continue to
count down independently without interfering with the
function itself.
Please note: During this phase, it isn’t possible to see the
minuteminder (only the
icon will be displayed), that will
continue counting down in background. To retrieve the
minuteminder screen press
to stop the function that is
currently active.
. KEYLOCK
To lock the keypad, press and hold
for at least five
seconds. Do this again to unlock the keypad.
KEYLOCK
Please note: This function can also be activated during
cooking. For safety reasons, the oven can be switched off at
any time by pressing
.
