Whirlpool R-94, User Manual

Page: 20 / 36

3-8
REMOVING THE FAN MOTOR
1. Unplug the air conditioner or disconnect
the power.
2. Remove the air conditioner from the win-
dow (see page 2-2 for the procedure).
3. Remove the grille assembly and cabinet
from the air conditioner (see pages 3-2
and 3-3 for the procedures).
4. Remove the top and bottom screws from
the control panel brackets and unclip the
thermistor from the front of the evaporator,
then move the control panel assembly out
of the chassis pan.
Control Panel
Screw
Screw
Screw
Screw
Top Air
Guide Cover
5. Remove the two screws from the top air
guide cover and remove the cover.
6. Lift both ends of the evaporator out of the
front air guide and pull the right side out so
you can access the cover behind it. NOTE:
Be careful not to bend the bottom of the
fins on the evaporator when you handle it.
Lift Evaporator
Out Of Guide
Pull
Out
Evaporator
Front Air
Guide
Cover
Unclip
Thermistor
NOTE: Sharp edges may be present.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.