3-6
REMOVING THE THERMISTOR,
THE CAPACITOR, & THE MAIN PCB
1.
Unplug the air conditioner or disconnect
the power.
2.
Remove the air conditioner from the win-
dow (see page 2-2 for the procedure).
3.
Remove the grille assembly and cabinet
from the air conditioner (see pages 3-2
and 3-3 for the procedures).
4.
To remove the thermistor:
a) Unclip the thermistor from the front of
the unit.
b) Disconnect the 4-wire connector from
the main PCB at CN-TH1. NOTE: You
may have to move some of the wire
bundles out of the way to access the
connector.
c) Pull the thermistor through the chassis
hole and remove it.
Thermistor
Connector CN-TH1
Unclip
Thermistor
NOTE:
Sharp edges may be present.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
Summary of Contents for R-94
Page 4: ... iv NOTES ...
Page 36: ...CORPORATION ...
