3-12
REMOVING THE OVERLOAD PROTECTOR
AND THE COMPRESSOR
1.
Unplug the air conditioner or disconnect
the power.
2.
Remove the air conditioner from the win-
dow (see page 2-2 for the procedure).
3.
Remove the grille assembly and cabinet
from the air conditioner (see pages 3-2
and 3-3 for the procedures).
4.
To remove the overload protector:
a) Remove the hex cap nut and the nylon
flat washer from the terminal cover and
remove the cover.
b) Disconnect the brown wire from the
compressor terminal, and the blue wire
from the overload protector terminal.
Terminal
Cover
Hex Cap Nut
& Nylon Flat
Washer
Overload
Protector
Blue
Wire
Brown
Wire
5.
To remove the compressor:
a) Remove the overload protector (see
step 4).
b) Disconnect the red wire from the
S (V)
terminal and the black wire from the
R (U)
terminal of the compressor.
c) Remove the gasket.
Black
Wire
Red
Wire
Compressor
Terminals
Compressor
Terminals
Gasket
REASSEMBLY NOTE: When you reinstall the
terminal cover on the compressor, make sure
that the overload protector is centered in the
gasket hole, and does not sit on any portion of
the gasket.
NOTE:
Sharp edges may be present.
Electrical Shock Hazard
Disconnect power before servicing.
Replace all panels before operating.
Failure to do so can result in death or
electrical shock.
Summary of Contents for R-94
Page 4: ... iv NOTES ...
Page 36: ...CORPORATION ...
