4-26
REMOVING THE OVEN DOOR AND COMPONENTS
1. Unplug microwave oven or disconnect
power.
2. Open the microwave oven door.
3. Pry the choke cover away from the top
door pin, and remove the top pin from the
pivot bracket. Lift the door off the bottom
bracket, and remove it.
6. Starting at the top right corner (see the
round inset photo in the left column), pry
the choke cover out with a putty knife,
and unsnap it from the choke. Only re-
move the top, bottom and right sides of
the choke cover at this time. You will re-
move the handle end of the choke cover
later.
Choke Cover
Choke
Door Frame
4. Place the oven door front side down on a
padded surface.
5. Remove the choke screws from the door
frame.
Choke Screws
Unsnap Choke Cover
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before
operating.
Failure to do so can result in death or
electrical shock.
WARNING
Top Door Pin
Pry Out Choke
Cover Here
Pivot Bracket
